DIPOWER is a renewable energy company specialising in the design and manufacture
of green energy products such as inverter chargers solar inverters and solar panels.
It is very helpful in building solar systems for your RV and off-grid homes.
1. each inverter must be connected to the PV modules individually.
2. the settings of each inverter must be uniform.
3. the input wiring must be the same for each inverter.
4. make sure to connect the power sharing wires to devices on the same phase. However do not
connect power sharing cables between devices of different phases. Otherwise the investor may be harmed.
5. Make sure that the power distribution cables are of the proper length.
6. make sure that all battery cables are the same length and share the same battery pack.
Use original parallel cables and power sharing cables. Do not make your own. In addition parallel cables and power
sharing cables must not be parallel to AC power cables and battery cables but must be crossed or spaced 1 metre apart.
The LCD control panel allows users to easily adjust or change the charging current
output source and charging source priority to optimise the performance of the inverter.
Adopt DSP full digital control.
High precision MPPT controller.
Battery has equalisation charging mode.
Battery can be used or not PV Maximum input voltage 500Vdc.
Grid power and PV are both prioritised.
Optional WIFI/GPRS monitoring system.
Supports 6 machines connected in parallel to form a three-phase four-wire power generation system.
Insufficient PV power generation can combine PV with grid and battery to supply power to the load.
Economic mode can charge and discharge the inverter and utility power and oil engine can be chosen freely.
Thanks for subscribing!
This email has been registered!